Project 'Magneto' by Pedro Feduchi

Designer: Pedro Feduchi

Product: Finsa GreenPanel

Applications: Table top and bench

Location: Madrid, Spain

The Magneto project, by Pedro Feduchi, is based on a system of supports that can be used for both tables and benches. The system is made up of two pieces, the trestles and the boards that can be configured at different heights to respond to the different uses. The trestles are made of steel rod lacquered in the oven and the panels are made with Finsa GreenPanel. On one side of the board have been inserted neodymium magnets that attract the trestles to their proper position without the need for hardware. In one of its versions, the GreenPanel boards are green on the bottom, so that the table creates a coloured shadow on the floor.

About Finsa GreenPanel

Finsa GreenPanel is a highly resistant ultralight board. It consists of faces and core of thin MDF arranged like a grid. This innovative board has been developed for those applications that require the combination of broad thicknesses, low weight and high stability and resistance. It may be edge banded with the machinery normally used for other wood-derived boards. We recommend a PVC or ABS edge 2 mm thick. Finsa Greenpanel is a structural board with a extremely low weight, between 74 and 250 kg/m3 depending on its thickness. E1 classification: low formaldehyde content.

GreenPanel - More Ideas from Finsa Portfolio

GreenPanel is the lightest among Finsa's range of Lightweight Panels. With its 3mm MDF grid structure with 4mm MDF faces, this panel offers balance between low weight, high stability and resistance, and can be cut and edged using normal machines.